Ti－Si沸石的催化氧化性能Ⅱ．环己醇的氧化及环己酮的肟化

Ｔｉ－Ｓｉ沸石的催化氧化性能Ⅱ．环己醇的氧化及环己酮的肟化夏清华，王公慰，应慕良，郑禄彬（中国科学院大连化学物理研究所，大连１１６０１２）关键词Ｔｉ－Ｓｉ沸石催化剂，Ｈ_２Ｏ_２氧化剂，环己醇氧化，环己酮肟化．１．前言环己酮肟是生产ε－己内酰胺的关键中...     

二氧化碳氧化剂在烷烃催化转化反应中的应用研究进展

本文综述了近年来国内外有关利用二氧化碳作为氧化剂在烷烃催化转化反应中的研究状况。担载型的金属氧化物催化剂具有较好的催化活性。催化剂表面碱性位的存在可稳定活性中心并且有利于CO2的活化，CO2的作用是与烷烃脱氢产物H2和生成的表面积炭反应，从而提高反应活性及催化剂的稳定性。     

苯并咪唑衍生物的合成改进

利用空气作氧化剂, 无需任何催化剂, 以甲醇作溶剂, 芳香醛与邻苯二胺反应一步合成苯并咪唑衍生物, 产率均超过69%, 产物的结构通过元素分析、红外光谱和核磁共振氢谱确证, 该方法具有操作简单、反应条件温和、环境友好的优点.     

Chemical Reduction of CO2 to Different Products during Photo Catalytic Reaction on TiO2 under Diverse Conditions： an Overview

The chemical reduction of CO_2 remains a challenge with respect to the reversal of the oxidative degradation of any organic materials.The conversion of CO_2 into useful substances is essential in developing al- ternative fuels and various raw materials for different in- dustries.This also aids in preventing the continuous rise in tropospheric temperature due to the green house effect of CO_2.In this article an overview of the growth taken place so far in the field of CO_2 chemical reduction is pre- sented.The discussion comprises of photochemical meth- ods for the development of different products,viz.CO, CH_3O_H and CH_4,through chemical reduction of CO_2. This includes the use of photo catalysts,mainly TiO_2, and the role of a hole scavenger(such as 2-propanol)for this purpose.     

Preparation of high loading PolyHIPE monoliths as scavengers for organic chemistry

A novel microcellular polyHIPE monolith of high functional group capacity has been prepared by a two-step process including the synthesis of the scaffold by polymerization of a highly concentrated emulsion and then the in situ surface polymerization of methacrylate monomers. Application of the resulting functionalized monolith is demonstrated in a scavenging reaction of poly(glycidyl methacrylate)-grafted polyHIPE with 1-hexylamine. The open-cellular structure of the core combined with the good accessibility of the grafted functional polymer chains allows total scavenging of the amine in a relatively short period.     

Simple preparation of polymer supported IBX esters and amides and their oxidative properties

Novel polymer supported IBX esters and amides were prepared in two steps, which were the coupling of 2-iodobenzoic acid to a hydroxy or amino polystyrene followed by activation of the intermediate product. These polymer supported reagents were tested as oxidants by the conversion of a series of alcohols to the corresponding aldehydes or ketones. We found that the polymer supported IBX amides displayed excellent oxidative activity, in that they oxidized benzyl alcohol to benzaldehyde completely within 1 h at an oxidant to alcohol ratio of 2 to 1.     

Formation of different products during photo-catalytic reaction on TiO<Subscript>2</Subscript> suspension in water with and without 2-propanol under diverse ambient conditions

Studies on photo-catalytic reduction of CO₂ using TiO₂ photo-catalyst (0.1%, w/v) as a suspension in water was carried out at 350 nm light. CO₂ from both commercially available source, as well as generated in situ through 2-propanol oxidation, was used for this study. The photolytic products such as hydrogen (H₂), carbon monoxide (CO) andmethane (CH₄) generated were monitored in TiO₂ suspended aqueous solution with and without a hole scavenger, viz., 2-propanol. Similar photolytic experiments were also carried out with varying ambient such as air, O₂, N₂ and N₂O. The yields of CO and CH₄ in all these systems under the present experimental conditions were found to be increasing with light exposure time. H₂ yield in N₂-purged systems containing 2-propanol was found to be more as compared to the without 2-propanol system. The rate of H₂ production in N₂-purged aqueous solutions containing 0.1% TiO₂ suspension were evaluated to be 0.226 and 5.8 μl/h, without and with 0.5 M 2-propanol, respectively. This confirmed that 2-propanol was an efficient hole scavenger and it scavenged photo-generated holes (h⁺), allowing its counter ion, viz., e⁻, to react with water molecule/H⁺ to yield more H₂. The formation of both CO and CH₄ in the photolysis of CO₂-purged aqueous solutions containing suspended TiO₂ in absence of 2-propanol reveal that the generation of CH₄ is taking place mainly through CO intermediate. In presence of air/O₂, the yield of H₂ in the system without 2-propanol was observed to be negligible as compared to the system containing 2-propanol in which low yield of H₂ was obtained with a formation rate of approx. 0.5 μl/h.     

含氮杂环及其衍生物的氮氧化方法研究进展

含氮杂环及其衍生物中的N－氧化反应是合成许多精细化工产品，如日用化学 品、医药、农药的重要反应，但该反应选择性较高，只要求在杂环氮上进行氧化而 不影响分子其它部位，从氮杂环及其衍生物应用不同氧化剂选择性氧化综述了该类 化合物的N－氧化反应。     

Ranking Oxidant Sensitiveness: A Guide for Synthetic Utility

Common oxidants used in chemical synthesis, including newly developed perruthenates, were evaluated in the context of understanding (and better appreciating) the sensitiveness and associated potential hazards of these reagents. Analysis using sealed cell differential scanning calorimetry (scDSC) facilitated Yoshida correlations, which were compared to impact sensitiveness and electrostatic discharge experiments (ESD), that enabled sensitiveness ranking. Methyltriphenylphoshonium perruthenate (MTP3, 8 ), isoamyltriphenylphosphonium perruthenate (ATP3, 7 ) and tetraphenylphosphonium perruthenate (TP3, 9 ) were found to be the most sensitive followed by 2-iodoxybenzoic acid (IBX, 2 ) and benzoyl peroxide (BPO, 10 ), whereas the most benign were observed to be Oxone ( 12 ), manganese dioxide (MnO₂, 13 ), and N-bromosuccinimide (NBS, 17 ).     

Overcoming the Inhibition Effects of Citrate: Precipitation of Ferromagnetic Magnetite Nanoparticles with Tunable Morphology,Magnetic Properties,and Surface Charge via Ferrous Citrate Oxidation

This study demonstrates how the method of thermally assisted oxidative precipitation in water can be opened for—the so far neglected—metal organic iron(II) complexes (herein: citrate) in order to obtain, in one step, ferromagnetic magnetite nanoparticles, possessing essential ligand properties. Based on a dedicated analysis of the specific precursor in combination with the consideration of known properties of the ligand, it is possible to identify existing inhibition-attributes of the iron organyl such that these can be overcome. Moreover, they can be exploited in a targeted manner; thus, simply by changing concentrations, a variety of magnetite nanoparticle morphologies with distinct properties can be obtained. In the case of the herein investigated ferrous citrate, three major inhibition effects are identified. While two of them efficiently prevent the formation of magnetite and need to be addressed to be overcome, the third can be exploited to selectively synthesize, for example, relatively stable carboxyl group-bearing nuclei clusters, exhibiting the properties of magnetically responsive photonic crystals, or relatively large mesocrystals, whose intraparticular magnetic interactions are apparently disturbed.